Remember me
Lost Password Register


Nitrox Advantages? Input Needed!
12-15-2004, 12:58 PM,
#16
Re:Nitrox Advantages? Input Needed!
Regs typically do not need O2 cleaning as long as the percentage is under 40%, but many places recommend it as a safety factor.

A lot of tanks come O2 clean. PST tanks for example come O2 clean from the factory.

It's a safe practice to have your tanks cleaned, even if you are getting them filled with "pre-mix" - nitrox already mixed up. It's a requirement to have them cleaned if they are doing partial pressure fills - where they squirt in pure O2 and then air in on top of it.

Other than that, you should be pretty well set.
Reply


Messages In This Thread
Nitrox Advantages? Input Needed! - by Rik - 12-13-2004, 06:56 PM
Re:Nitrox Advantages? Input Needed! - by Omicron - 12-13-2004, 07:25 PM
Re:Nitrox Advantages? Input Needed! - by dfreeman - 12-13-2004, 07:56 PM
Re:Nitrox Advantages? Input Needed! - by divbum - 12-13-2004, 08:25 PM
Re:Nitrox Advantages? Input Needed! - by matt t. - 12-14-2004, 08:23 AM
Re:Nitrox Advantages? Input Needed! - by ethanb - 12-14-2004, 11:05 AM
Re:Nitrox Advantages? Input Needed! - by Omicron - 12-14-2004, 12:02 PM
Re:Nitrox Advantages? Input Needed! - by matt t. - 12-14-2004, 02:22 PM
Re:Nitrox Advantages? Input Needed! - by Rik - 12-14-2004, 09:02 PM
Re:Nitrox Advantages? Input Needed! - by Omicron - 12-14-2004, 10:45 PM
Re:Nitrox Advantages? Input Needed! - by Omicron - 12-15-2004, 12:58 PM
Re:Nitrox Advantages? Input Needed! - by Omicron - 12-15-2004, 04:52 PM
Re:Nitrox Advantages? Input Needed! - by dfreeman - 12-15-2004, 07:03 PM
Re:Nitrox Advantages? Input Needed! - by Rik - 12-15-2004, 07:15 PM
Re:Nitrox Advantages? Input Needed! - by divbum - 12-16-2004, 10:04 AM
Re: Nitrox Advantages? Input Needed! - by Chris H - 03-07-2005, 06:15 PM
Re: Nitrox Advantages? Input Needed! - by Omicron - 03-08-2005, 08:23 AM
Re: Nitrox Advantages? Input Needed! - by Chris H - 03-09-2005, 09:13 AM
Re: Nitrox Advantages? Input Needed! - by divbum - 03-10-2005, 01:15 PM



Users browsing this thread: 1 Guest(s)